In November, enjoy 2 free months on Djaboo with the code: DJABOO26 → I'm taking advantage of it
Stock, manufacturing

The nomenclature, what your product really consists of

The bill of materials (BOM) is a structured list of all the components needed to manufacture a finished item. It's the reference document that links your inventory, costs, and production.

✓List of components per product
✓Calculated cost price
✓Components deducted during manufacturing
app.djaboo.com/admin/stock
ArticlesManufacturingBR stockBL stockFiling
60cm base cabinet
Component
Qty
Cost
18mm oak panel
2
36,00 €
90° stainless steel hinge
4
12,80 €
5L Matte Varnish
0,3
9,60 €
Assembly screws
1
2,40 €
Material cost60,80 €
60,80 €
Material cost
4
Components
46
Manufactureables
0
Forgotten component
1 record
All components
Trusted by
TcheelFlorineKap SuccessSCULDCyber ​​vulnerabilityVoxSmartidoo3D EmergencyDom.comGDBMLucile PayeAirexbookNesterapieCalyansYippeeDominiThe AgencyTcheelFlorineKap SuccessSCULDCyber ​​vulnerabilityVoxSmartidoo3D EmergencyDom.comGDBMLucile PayeAirexbookNesterapieCalyansYippeeDominiThe Agency
What the module does

Knowing what's inside, and what it costs

As long as the composition of a product lives in the mind of the workshop, the cost price is an estimate and the stock is an approximation.

List of components
Each manufactured product has its own nomenclature.
Cost price
The material cost is calculated based on the components.
Deduction from inventory
The manufacturing process automatically consumes the components.
Several levels
A subset can itself have its own nomenclature.
Compose

A bill of materials line is more than just a component and a quantity

The unit is also necessary, and the loss when there is one. A cutting offcut or varnish evaporation that is not declared causes the theoretical stock to drift week after week, without anyone understanding where the discrepancy comes from.

  • Component, quantity and unit
  • Potential loss declared
  • Unit cost of the component
See the Stock module
app.djaboo.com/admin/stock/bom
Nomenclature line
Component18mm oak panel
Quantity2
UnitUnit
Loss5%
Actually consumed2,1
make

A manufacturing operation moves the inventory in both directions.

The finished product enters, the components leave. If these two movements are not recorded together, the component inventory remains artificially high and the company places orders too late.

  • Components deducted from the quantity manufactured
  • Finished product entered stock
  • Tracked and viewable movement
View supplies
app.djaboo.com/admin/stock/manufacturing
Manufacturing of 10 boxes
60cm base cabinet+ 10
18mm oak panel- 21
90° stainless steel hinge- 40
5L Matte Varnish- 3
To anticipate

How many can I make with what I have?

This is the question we ask ourselves when faced with an order. Without a bill of materials, we have to check each component manually. With one, the most critical component directly provides the answer.

  • Manufacturable quantity calculated from stock
  • Identified limiting component
  • Informed ordering decision
View Orders
app.djaboo.com/admin/stock/manufacturing
Can be manufactured with current stock
18mm oak panel92 boxes
184 available
90° stainless steel hinge3 boxes
12 available
5L Matte Varnish113 boxes
34 available
The hinge limits it to 3 compartments
Ecosystem

The nomenclature links the workshop to commerce

It determines what can be sold, what needs to be bought, and what the product actually costs.

Stock
Components and finished products in the same meter.
Purchasing
The need for components stems from manufacturing processes.
Sales
The selling price is compared to the cost price.
Barcodes
Components and finished products labeled.
Multi-depot
Manufacturing begins at the warehouse which has the components.
Accounting
The valuation of the stock remains consistent.
The complete guide

Everything you need to know about product nomenclature

What is a product nomenclature?

A product bill of materials (BOM) is a comprehensive and ordered list of all the components, raw materials, sub-assemblies, and supplies used in the manufacture of a finished product. It indicates not only which items are needed, but also in what quantity, in what unit, and with what tolerance for loss.

In practical terms, if you're making a piece of furniture, your bill of materials lists the boards, screws, hinges, glue, legs, and specifies for each component the exact quantity needed to produce one unit. If you're assembling an electronic product, it details each circuit board, each cable, each enclosure.

The bill of materials is distinct from the manufacturing process. The process describes the production steps (which operations to perform, in what order, on which machine). The bill of materials, on the other hand, answers only one question: what is this product made of?

This document is used by several departments: production to know what to take out of stock, purchasing to anticipate supplies, accounting to calculate costs, and the quality department to trace components in case of a problem with a delivered product.

What is the practical purpose of a product nomenclature?

Knowing the cost price

The bill of materials (BOM) is the starting point for calculating a product's cost price. By associating each component with its unit purchase cost, you obtain the total material cost of one unit manufactured. Let's take a hypothetical example: if your product contains 3 components at €2 each, 1 component at €5, and 0,5 kg of raw material at €4/kg, the material cost comes to €13. Add labor and overhead costs, and you have your complete cost price. Without an up-to-date BOM, this calculation relies on estimates that quickly diverge from reality, especially when supplier prices change.

Knowing what can be made with the available stock

Before launching a production order, it is essential to verify that all components are available in sufficient quantities. The bill of materials (BOM) allows for this feasibility check: for each listed component, the system compares the required quantity (quantity per unit multiplied by the number of units to be produced) with the available stock. If a component is missing, the production order cannot be launched or must be adjusted. This verification prevents production from being halted mid-production due to the absence of an unforeseen component.

Deduct the components from the manufacturing

When a production order is launched, the components listed in the bill of materials (BOM) are automatically deducted from inventory. If you produce 10 units and your BOM specifies 3 screws per unit, 30 screws are removed from component stock and the finished product is added to inventory. This automatic deduction ensures that your inventory level remains accurate without manual entry for each production run. This is one of the most direct operational benefits of a well-configured BOM.

Trace the components of a delivered product

If a defect is found in a product delivered to a customer, it is often necessary to identify which batch of components was used during manufacturing. The bill of materials, cross-referenced with the manufacturing order history, makes it possible to trace a specific component back to its supplier. This traceability is particularly useful in the food, medical, and industrial sectors where product recalls may be required. It also provides valuable evidence during quality audits.

What does a line of nomenclature contain?

Each component in a bill of materials (BOM) occupies a line. Here is the information that a BOM line must contain to be usable:

Champ Description Example
Component Reference and description of the item being manufactured M4-16 screw / M4x16 stainless steel screw
Quantity Number of units of the component needed to manufacture one unit of the finished product 4
Unit Unit of measurement in which the quantity is expressed Piece, kg, liter, meter...
Potential loss Percentage of material lost during manufacturing (scrap, evaporation, normal waste) 5% (actual quantity consumed = 4,2)
Unit cost Purchase or cost price of the component, used for calculating the material cost 0,08 € / piece

The "potential loss" field is often overlooked by very small and small businesses starting out with a bill of materials. However, it has a direct impact on inventory accuracy: if you consistently consume 5% more material than planned without declaring it in the bill of materials, your theoretical inventory will gradually diverge from your actual inventory.

Simple nomenclature and multi-level nomenclature

A single-level bill of materials (BOM) directly lists all the components that go into the finished product, without distinguishing between sub-assemblies. It is the simplest and quickest form to implement. It is suitable for simple products composed only of raw materials and purchased parts.

Fictional example of a single-level bill of materials for an assembled product:

  • Plastic case: 1 piece
  • Electronic circuit board: 1 piece
  • Power cable: 1 piece
  • Fixing screws: 4 pieces
  • Note: 1 piece

A multilevel bill of materials (BOM) introduces subassemblies. A subassembly is itself a manufactured item, which has its own BOM. The finished product contains subassemblies, and each subassembly contains components. This hierarchical structure accurately reflects the reality of manufacturing when certain elements are produced in-house before being assembled into the final product.

Let's return to the previous hypothetical example. If the electronic board is manufactured in-house from purchased components, it becomes a sub-assembly with its own bill of materials:

  • Level 0: Finished Product
    • Level 1: Plastic case (purchased)
    • Level 1: Electronic board (manufactured in-house)
      • Level 2: Printed Circuit Board
      • Level 2: 100 µF Capacitor
      • Level 2: 10 kΩ resistance
    • Level 1: Power cable (purchased)

The multi-level nomenclature is more complex to maintain, but it allows for more precise cost calculation, better management of semi-finished goods stocks and finer traceability.

What happens in the warehouse during manufacturing

When a manufacturing order is launched, three stock movements occur in sequence.

First, the components listed in the bill of materials are reserved or removed from stock. The quantity consumed is calculated by multiplying the unit quantity in the bill of materials (including any potential loss) by the number of units to be produced. These components are then removed from the raw materials or purchased components inventory.

Secondly, if manufacturing involves sub-assemblies, these are produced and temporarily placed in semi-finished stock before being consumed in turn for final assembly.

Finally, upon completion of the production order, the finished product is added to the finished goods inventory for the quantity actually produced. If any consumption discrepancies have been observed (components consumed more or less than expected), they must be recorded to maintain inventory consistency.

This mechanism assumes that the bill of materials is accurate. An incorrect quantity in the bill of materials immediately results in a stock discrepancy that accumulates with each production run and eventually renders the theoretical inventory unusable.

Keep your bills of materials up to date when components change

Components evolve: a supplier changes a part number, a material is substituted for cost or availability reasons, a formula is adjusted. Each such change must be reflected in the bill of materials before the next production order, not after.

Here are the situations that should trigger a nomenclature update:

  • Replacing a component with an equivalent from a different part number or supplier
  • Change in the quantity used, for example following an improvement in the manufacturing process
  • Addition of a component not initially planned (accessory, packaging, instructions...)
  • Removal of a component that has become unnecessary
  • Change of unit of measurement following a change in supplier packaging
  • Loss rate revision following production observation

A good practice is to version bills of materials (BOMs): each version has an expiry date and replaces the previous one from a defined date. This makes it possible to know which version of the BOM was active when a production order was placed, which is essential for traceability and for analyzing cost variances.

Companies that manage their bills of materials (BOMs) in a spreadsheet quickly encounter versioning difficulties: files multiply, versions become confused, and no one is certain they are working on the correct one. A dedicated management tool centralizes this information and ensures that a single repository is used by everyone.

The most common mistakes

Forget the losses and the falls

A bill of materials system that doesn't account for manufacturing losses (cutting scraps, evaporation, normal process rejects) underestimates actual material consumption. With each production run, the theoretical stock level deviates from the physical stock. After a few weeks, inventory counts reveal unexplained discrepancies, and confidence in the stock data collapses.

Working with an outdated nomenclature

Using a bill of materials that no longer reflects the reality of the current product is one of the most costly sources of error. Cost calculations are inaccurate, component requirements are poorly estimated, and inventory deductions are based on part numbers that no longer correspond to what has actually been consumed.

Confusing quantity per unit and total quantity

The bill of materials (BOM) must always express the quantity of components needed to manufacture one unit of the finished product, not the total quantity for a given batch. If you enter the quantity for a batch of 100, your BOM will be incorrect for any other production volume.

Do not distinguish between purchased components and manufactured sub-assemblies

Treating an internally manufactured subassembly as a purchased component prevents the system from correctly calculating the requirements for basic components. The cost price is also distorted, because the cost of the manufactured subassembly is not limited to its purchase price: it includes the material and manufacturing time.

Do not version the changes

Modifying a bill of materials (BOM) without recording the date and nature of the change makes any retrospective analysis impossible. If a quality issue arises with products delivered three months ago, you will not be able to determine which version of the BOM was active at that time, nor which components were used.

Duplicate the bills of materials manually

When two products share common components or identical subassemblies, some companies create entirely separate bills of materials (BOMs). If the common component changes, each affected BOM must be updated. A single oversight can create inconsistencies. The best approach is to reference the same subassembly in multiple BOMs, so that a single change is reflected everywhere.

F.A.Q

What we are most often asked

What is the difference between a bill of materials and a manufacturing range?
The bill of materials answers the question "What is the product made of?" by listing the components and their quantities. The manufacturing process answers the question "How is the product manufactured?" by describing the production steps, workstations, and operating times. The two documents are complementary and are often linked within a production management system, but they serve distinct purposes.
Can you manage your nomenclatures in an Excel file?
Excel is a good starting point, especially for simple, single-level structures. However, its limitations quickly become apparent: lack of reliable version control, risk of errors during manual modifications, inability to automatically link the bill of materials (BOM) to stock movements and production orders, and difficulty managing multi-level BOMs with components shared between several products. For operational management, a dedicated tool is preferable as soon as the number of SKUs or manufactured products becomes significant.
How to calculate the cost price from a bill of materials?
For each line in the bill of materials, multiply the net quantity consumed (unit quantity plus the waste rate) by the unit cost of the component. Add all these amounts together to obtain the total material cost per unit manufactured. Then add the direct labor cost (manufacturing time multiplied by the hourly rate) and a share of overhead costs to obtain the full cost of goods sold. This calculation must be repeated each time the price of a component or the quantity consumed changes.
Is a classification system required for products bought and resold without processing?
No. A bill of materials (BOM) is only relevant for items you manufacture or assemble yourself. An item purchased and resold as is is managed directly as an inventory item, without an associated BOM. A BOM only comes into play when you modify or assemble components to create an item different from those you purchased.
How do you manage a component used in several different products?
The component is created only once in your item repository and referenced in as many bills of materials as needed. When its price changes, you update its item record only once, and the new cost is automatically factored into all cost calculations for products that use it. This approach avoids duplicates and ensures data consistency.
How does Djaboo manage product nomenclatures?
Djaboo integrates bill of materials (BOM) management directly into its production and inventory management module. You create your BOMs at one or more levels, associate unit costs with each component, and the cost price calculation is performed automatically. When a production order is launched, Djaboo checks component availability, deducts the quantities from inventory according to the BOM, and records the finished product. All data is centralized in a single tool, accessible without any special technical skills, designed for small and medium-sized businesses.

The composition of your products deserves better than the workshop's memory.

Create a free account and submit your first bill of materials.

No bank cardYour data remains in FranceAssistance in French
5 / 5 - (562 votes)